Products >> Electronic M1-ID Card Lock

M1-ID card lock is a kind of ID lock, it programs cards by lock directly. Key card is Mifare Classic 1K card.

M1-ID card lock have 1pc main card and maximum 200pcs key cards.
The first card read on lock is the main card, main card can be used for open lock, program key cards.

How to program key cards?

Read the main card, lock open, blue light flash, it means lock is ready to configure key card.

Configure Key Card:

When lock is ready to configure, read a blank card, configure successfully when a “Dee~” sound.

*If red LED lights up, means data is full.

*After configuration, press handle or wait for blue LED lights down can finish configure action.

Note: After read main card, lock opens,it will skip configure action when press lock handle.

How to clear key cards?

Two ways:

a)Initialize lock, configure a new main card.

b)Read the main card, when a “Dee~”sound,read 5 times the main card, then lock will make a long ‘Dee~” sound, means all key card and remote controller cleared.

If I do not want any cards and reset locks, how to do it?
Turn mechanical key 5 times, a ‘beep’ sound when each turning, a long ‘beep’ sound after 5 times turning, than all key card are deleted.

Please click here to download user manual

none